1.-

When entering into programming mode do not lift the receiver

2.-

From the Programming Station press the [P] Programming Key ...

3.-

until System Programming is displayed. Press the Scroll Down Key if necessary.

4.-

Select System Programming (using grey menu key next to display)

5.-

Enter the System Programming Password � 1111

6.-

Select System (using grey menu key next to display)

7.-

Select Time and Date (using grey menu key next to display)

8.-

8. Enter the correct time in 24-hour format, (e.g. 1:30pm as 1330)
The display will prompt for date to be entered

9.-

Enter in the correct date in DDMMYY format, (e.g. 1 January 2001, 010101)

10.-

The display will now revert back to programming menu

11.-

Press [HANDSFREE] key to finish programming