Changing the time on a Strata DK system must be done from the "main" or primary phone. It is usually extension # 10, or # 200.
1.-	With the phone on-hook, dial intercom, #, 652 (depending on the system type, the # may or may not apply)
2.-	Enter the correct time using HH/MM/SS, like 07:24:00
3.-	Press redial

Comdial DX-80 System

Changing the time on a Comdial DX-80 system can be done from any display phone.
1.-	Press Feature # * and enter in your password (Default password ########)
2.-	Press Show and enter 0803
3.-	Press Save then Show
4.-	The option to change the Year will appear - if you do not need to change the year, press Next - if you need to change this value, press Chg, enter in two digits for the year and press Save then Next
5.-	The option to change the Month will appear - if you do not need to change the month, press Next - if you need to change this value, press Chg, enter in two digits for the month and press Save then Next
6.-	The option to change the Day will appear - if you do not need to change the date, press Next - if you need to change this value, press Chg, enter in two digits for the date and press Save then Next
7.-	The option to change the Weekday will appear - if you do not need to change the weekday, press Next - if you need to change this value, press Chg, to select the weekday, and press Next
8.-	The option to change the Hour will appear - press Chg and enter in two digits for the hour in military format - press Save then Next
9.-	The option to change the Minutes will appear - press Chg and enter in two digits for the minutes and press Save
10.-	Press the Hold button to exit programming mode

TOSHIBA 16

Leave the handset on hook, press intercom 6 5 2, then enter the time of a 24 hour clock, entering 2 digits for the hour, 2 digits for the minutes, and 2 digits for the seconds � enter a leading 0 for any single digit entered, press Redial, press Speaker. This must be done at extension 10 � usually the receptionist phone. For example, if the time is 2:15 P.M., press intercom 6 5 2, 1 4 1 5 0 0, Redial Speaker.

TOSHIBA 16E / 40

Leave the handset on hook, press intercom # 6 5 2, then enter the time of a 24 hour clock, entering 2 digits for the hour, 2 digits for the minutes, and 2 digits for the seconds � enter a leading 0 for any single digit entered, press Redial, press Speaker. This must be done at extension 10 � usually the receptionist phone. For example, if the time is 2:15 P.M., press intercom # 6 5 2, 1 4 1 5 0 0, Redial Speaker.

TOSHIBA 280 / 424

Leave the handset on hook, press intercom # 6 5 2, then enter the time of a 24 hour clock, entering 2 digits for the hour, 2 digits for the minutes, and 2 digits for the seconds � enter a leading 0 for any single digit entered, press Redial, press Speaker.
This must be done at extension 200 � usually the receptionist phone. For example, if the time is 2:15 P.M., press intercom # 6 5 2, 1 4 1 5 0 0, Redial Speaker.

TOSHIBA CTX 100

Do Not Pick Up Handset (Must be done at display phone)

- Press Hold Button * # * # 1 * 2 * 3 *
- Display says Password =
- Enter 0 0 0 0
- Press HOLD Button
- Display says Prog =
- Enter 9 0 2
- Press HOLD
- Display says Select Param

To change Date:
- Press Intercom Button
- Enter Date: YY MM DD (YY=02, MM=10, DD=28)
- Press HOLD Button
- Press HOLD
- Lift Handset and return to cradle
To change Time:
- Press Line 1 button (button directly above intercom button)
- Enter Time: HH MM SS (HH=22 MM=03 SS=00) - military time must be used
- Press HOLD
- Press HOLD
- Lift handset and return to cradle

Toshiba DK280

*Date*
	From receptionist station, without lifting the handset, press "Intercom" Dial "#651" Dial the time in YY:MM:DD format. Press "Redial" or "#". Press speaker.
*Time*
	From receptionist station, without lifting the handset, press "Intercom" Dial "#652" Dial the time in military format HH:MM:SS. Press "Redial" or "#". Press speaker.
*Day of the Week*
	From receptionist station, without lifting the handset, press "Intercom" Dial "#653" Dial the day of the week (1-7). Press "Redial" or "#". Press speaker.

Toshiba Perception System

From attendant station: Follow all steps even if you wish to change only the time on your system.
Display Date:
	Press the "DIS TOD" key. The date is now displayed as follows: SRC cos DEST Month Day Year
Set Date: Enter the date on the dial pad in MMDDYY format. The new date is displayed. Display Time:
	Press the "DIS TOD" key again. The time is now displayed as follows: SRC cos DEST Hours Minutes Seconds
Set Time:
Enter the time in military time HHMMSS format (for example, 090105 for 9:01 am and 5 seconds and 210105 for 9:01pm and 5 seconds). The new time is displayed.
To Start the Clock and Clear Display: Press the "DIS TOD" key a third time.